Electrical Voltage Control Unit

Electrical Voltage Control Unit

Code-AVR-AX-04

GENERAL DESCRIPTION

• The Voltage Control Unit(AVR) is a solid state, encapsulated, state of the art design with latest technology.
• The AVR is supplying power to the exciter field of A.C. generator and will maintain gererator voltage within close limits from no load to full load, with a frequency change of not more than +- 4%.
• Upon application or rejection of rated load, the generator voltage recovers to nominal value within 0.5 sec. However, the transient performance is mainly dependent upon the exciter & a.c. generator design aspects.
• Under some circumstances the a.c. generator wave shape changes considerably from no-load to rated load due to the typw of load, hence the r.m.s average or the peak voltage does not stay in proportion. For more than 10% harmonic distortion, the voltage regulation may be outside the limit specified.
• Unbalanced load on 3 phase a.c. generators also produces regulation figures outside the limit.
• AVR has been tested at factory and set to standard voltage, frequency and stability prior t the despatch.
• AVR has been incorporated with special filters to perform satisfactorily or no linear loads.

FEATURES AND TECHNICAL SPECIFICATIONS:

Input Power

• Voltage: 240V ac rms +- 10%
• Frequency:50/60 HZ

Output Power

• Voltage: 95 V dc at 240 V a.c. input
• Current : 6 Amps dc / 8 Amps for 10 secs for motor starting